How To Install Bathroom Mirror

Step 1: check the wall. Please ensure that the wall to be installed is a load-bearing wall, which can support the weight of the mirror.

Step 2: measure the hook distance. Measure the distance between the center points of the two hooks with a tape measure.

Step 3: center the wall. Measure the width and height of the wall with a tape measure, and mark the positions of the two center points with a pencil.

Step 4: punch holes. Use the prepared percussion drill to drill at the marked center point, and the drilling depth of 6mm-8mm drill is about 5cm.

Step 5: install expansion screws. Use a hammer to drive the expansion screw into the position of the drilled hole.

Step 6: tighten the screws. Screw the screw into the expansion screw with a screwdriver, and finally flow out about 5mm away from the wall (the 7-shaped hook needs to be screwed with pliers).

After knowing the installation method, you can also install the bathroom mirror yourself in the future. This is also a big knowledge that you have learned. If you are still afraid that you will not do well, then go and ask a professional to install it.